Hello! login Register

Hygiene Station-SR01

Hand Washing; Hand Drying; Hand Disinfection; Sole Cleaning

Setting method of Control Panel

1.When the machine starts upthe control panel will show on as follow


 
 

 

 

 


2. The equipment can set parameters: sole cleaning time, hand drying time, hand disinfection time, gate opening time;

Method of setting:

1.Press”SET”, enter the following interfacePress up and down arrow buttons to switch the settings pagepressSET” to choose the function option that need to be set.

 


 
 

 

 

 

 


2. Set the function parameters by the left and right identification buttons, input the value through the right numeric keypad; press “ENT” after the input is completed and press the “ESC” button 3 times to complete the setting;

 


 
 

 

 

 


C. Daily Maintenance

1.  Equipment Cleaning:

Press the emergency stop switch and lift the FlipPicture 3-1);

Remove the Combined Cover in Dry Zone, clean the absorbent pad (repeated and pulled in clear water, then remove and dry water, do not wring water out to prevent damage to the dry mat)

Open the drain valves in the sole cleaning sank. While draining, brush the bottom of the tank with a brush until the sewage is drained;

Lower the support frame and cleaning of the equipment is completed;


  

 

 

 

 

 

 

 

 

 

 

 

 

 


­

 

 

                    

1. Change the roller brushThe brush roller rubs against the sole for a long time, which causes a certain degree of wear on the brush roller. This is a normal phenomenon. When the brush wear affects the cleaning effect, the brush roller can be replaced.   

Changing method: As Picture 3-2Press the emergency stop switch, lift the flip cover, and pull out the roller brush from one side of the roller brush bearing housing and then can replace the roller brush;

 

 

 

 


  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


                              Maintenance

Maintenance of Roller brush bearing(Picture 4-1)

     Lift the flip cover and remove the oil filling port of Bearing Housing in Bearing Seat

     add some suitable grease in oil filling port.

 

 


 
 

 

 

 

 

 

 


Notice: Maintenance per 3 months. The grease we recommend NEW MOLYNOC GREASE.

Warning: All the maintenance should be operated under the condition of power off.

 

 

 

 

 

 

 

D. Product Specification

 

Model

Shape Dimensionmm

Cleaning Zone

Drying Zone

Water Temperature

Water Tank

SR01-V5

2610*998*1495

1090*620mm

586*620mm

0-40

35L

 

Operation Voltage

Motor Power

Noise

Max Load

N.W

220V

180W

<60db

400KG

500KG

 

E. Common Trouble Analysis

 

Problem

Reason

How to solve problems

Machine Doesn't work

The power outlet loose

Check if the power outlet is properly connected

The power switch is

 OFF

Check the power switch is turned on.

The sensor is blocked by dust

Check sensor indicator light is on(red light) and

clean the dust.

Brushes doesn't work

The brushes are loose

Adjust the brushes by hand (pls check the daily maintenance).

Machine keep working when people's absent.

The sensor is activated by unknown things

Confirm the sensor is clean and keep it clean.

 

 


Hygiene Station-SR01
Hand Washing; Hand Drying; Hand Disinfection; Sole Cleaning
Long press to look detail
Long by picture save/share
INQUIRY

enquiry form:

  • Please enter the verification code

enquiry product:


You have no items to require

Hygiene Station-SR01

Get a Quote
INQUIRY

enquiry form:

  • Please enter the verification code

enquiry product:


You have no items to require

  

info@slemon.com

www.slemon.com

                    

    

NO. 264, Baoshi E. Rd, Shiyan, Bao’an, 

Shenzhen, 518108 China

        

+86 755 2955 7876

+86 180 1871 9652

            

  • 取消